Painting exterior walls can lead to the best outcomes once the right steps are followed. Individuals who love to maintain their house and do the job by themselves will surely enjoy painting exterior walls. They will experience a fun day scraping, sanding and preparing the walls before they'll climb ladders and mix paint. Here is the step-by-step process in painting exterior walls.
Scrape the Walls
The exterior walls where you can find chipping old paint should be scraped in order that the peeling paint will undoubtedly be removed. Seal the crevices and cracks with spackling compound or painter's caulk. Then, sand the walls using 100-grit sandpaper until you can achieve smoothness on the wood.
Use Mild Soap and Water to Wash the House
You can make use of a pressure sprayer in washing the home; however, you have to be sure that you don't dig grooves into your wood. Rinse off the soap and allow the wood to dry totally.
Apply Primer Coats
You can apply as many primer coasts as you necessary using a wide brush. You should follow the instructions distributed by the manufacturer.
Apply the Pain
In applying the paint, you will need to start from the very best down starting at your fascia boards and eaves. The complete fascia and eaves perimeter must be painted before you start on your walls.
Start the Wall Painting
Start out with a wall area from the most notable with the use of long horizontal strokes with your brush. Begin in a spot which does not have paint onto it and apply the paint toward the area which you painted. This process should be repeated until you have applied the first coat. Always follow the instructions of the manufacturer on the next coats.
In painting exterior walls, it's important to wear safety glasses all the time. You can even wear something to protect your lungs when you sand the walls. Let the spackling compound or painter's caulk dry totally before you start sanding. This will ensure that there will be an excellent covering around your trim. If you have poured paint right into a bucket, be certain that the paint's lid can be sealed tightly. 屋根塗装工事 can drive a 6d finish nail and make holes around the paint's rim will assure proper seating of the lid which will preserve your paint in the end. Finally, it is not smart to stroke until your brush will be out of paint because this can bring about uneven coats.